Proper techniques and diligence during oil seal installation will result in what seems like an unremarkable situation – a component holding its lubrication. When something you’ve installed works effectively and quietly, you know you’ve done it right.
-15 °C to + 180 °C
Begin with a thorough inspection of all involved surfaces:shaft sealing surface and housing bore, seal lip(s), and outside diameter. Maintaining the integrity of the sealing lips is “Priority 1″. The slightest tear or nick can develop into a more significant issue during operation.
When the oil seal material and the chemical are not compatible, there will be a chemical attack, which increases at high temperatures. The only way to remedy this is to select the right material for your application. If you’ll be dealing with harsh chemicals, choose oil seals that are made with reliable materials for their compatibility.
The range of uses of peroxydically cross-linked EPDM includes in hot water and steam seals. EPDM is also very resistant to ageing and ozone. Compared with the usual types of synthesis natural rubber it has good resistance to cold temperatures. EPDM is not resistant to aliphatic or aromatic hydrocarbons or mineral oil products. Resistance to chemicals, and also to oxidising agents, is very good. Temperature range from -50 °C to +140 °C depending on type.