First disconnect the battery earth terminal , to avoid the risk of a short circuit while the fuel pipes are disconnected.
Detergents: This additive isn’t like your laundry detergent! It focuses on preventing deposits, rust, and corrosion from forming on the piston ring area, piston under-crown, and other surfaces that tend to overheat.
The spark plug ignition coil works by converting the low voltage electricity from the battery into a much higher voltage that is capable of creating a spark across the spark plug gap. This high voltage is delivered to the spark plug through the ignition coil wire, which is connected to the secondary winding of the ignition coil.
The temperature within the oil seal environment is the main factor that dictates the composition of an oil seal. Generally, there is a range of set temperatures that are optimal for that material. If the operating environment is too cold, the seal may become brittle and, at high temperatures, the seal material may show increased elasticity and become leaky.
PTFE material is a perfect ingredient in making more reliable oil seals. These materials are used to make oil seals that can resist dry or unlubricated operations. PTFE oil seals, which are also called teflon oil seals, have a thermal strength ranging from -202 degrees Fahrenheit to 392 degrees Fahrenheit and an excellent chemical resistance. Oil seal PTFE is considered as the future of radial shaft seals.
Improved Performance and Fuel Efficiency
Most standard oil seals have to comply with the DIN 3760 and ISO 6194 standards. Different standard types of oil seals are available that comply with these requirements.
③ Lip type code
The depth of the bonded seal can be less and the space between the bore and the outside diameter can be changed for ease of fitting. The bonding of rubber to metal is an important factor to be considered in the manufacture of such seals and should be considered carefully, since failure of the bond will cause the seal to fail. The metal case of the oil seal is usually made from mild steel of deep drawing quality which enables blanking, punching, stamping of the steel to the required dimensions.