Pump suction hoses play a critical role in various industries, serving as the vital link between a pump and the liquid source it draws from. These hoses are specifically designed to handle the suction side of a pump operation, ensuring that fluids are transported efficiently and safely. Their strength, flexibility, and material composition make them suitable for a wide range of applications, from agricultural irrigation to industrial fluid transfer.
Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”
In various industries, the efficiency of machinery and equipment is heavily reliant on the quality and functionality of hoses used in critical applications. One such innovation in hose design is the spiral wire hose, a type of hydraulic hose that is recognized for its durability, flexibility, and high-pressure capabilities. This article delves into the features, applications, and advantages of spiral wire hoses, highlighting their importance in modern industry.
Secondly, hand crimpers are cost-effective. Unlike larger hydraulic machines, which can be prohibitively expensive, hand crimpers are relatively affordable. This accessibility enables smaller businesses and independent technicians to invest in quality tools without significant financial strain. Moreover, the ability to perform in-house assembly and repairs reduces reliance on external services, further saving costs in the long run.
While hydraulic rubber hoses are built to be durable, regular maintenance is crucial to ensure their longevity and safety. This involves inspecting hoses for signs of wear, such as cracks, bulges, or leaks. Any damage should be addressed promptly, as compromised hoses can lead to fluid loss and system pressure failure, posing safety risks.
