The neuromorphic nature of the resistive switching in TiO2 memristors has triggered a series of studies addressing their functional coupling with living biological systems. The common features of the electroconductive behavior of memristive and biological neural networks have been revised in terms of physical, mathematical, and stochastic models (Chua, 2013; Feali and Ahmadi, 2016). The memristive electronics was shown to support important synaptic functions such as spike timing-dependent plasticity (Jo et al., 2010; Pickett et al., 2013). Recently, a memristive simulation of important biological synaptic functions such as non-linear transmission characteristics, short-/long-term plasticity, and paired-pulse facilitation has been reported for hybrid organic–inorganic memristors using Ti-based maleic acid/TiO2 ultrathin films (Liu et al., 2020). In relation to this, functionalized TiO2 memristive systems may be in competition with the new generation of two-dimensional memristive materials such as WSe2 (Zhu et al., 2018), MoS2 (Li et al., 2018), MoS2/graphene (Kalita et al., 2019), and other systems (Zhang et al., 2019a) with ionic coupling, ionic modulation effects, or other synapse-mimicking functionalities. Furthermore, the biomimetic fabrication of TiO2 (Seisenbaeva et al., 2010; Vijayan and Puglia, 2019; Kumar et al., 2020) opens up new horizons for its versatile microstructural patterning and functionalizations.
At present, the equipment and manufacturing process of domestic manufacturers of polyvinyl butyral are constantly getting closer to those abroad. For example, the wonderful use of polyvinyl butyral (PVB) has occurred in the printing industry and ceramic industry. Therefore, the domestic application of polyvinyl butyral (PVB) has an obvious upward trend in recent years.
For example, in the glass industry, it is because polyvinyl butyral (PVB) has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, UV insulation and other properties, so that once the laminated glass is sealed together, the glass sandwich (i.e. laminated material) will appear as a whole and look like ordinary glass. For example, in the porcelain industry, polyvinyl butyral is made into a film and used for printing paper film of ceramic (or enamel) products. First, it reduces the original glue small paper Decal process, reduces the production cycle and production cost, and second, it makes its ceramic (or enamel) patterns bright in color and smooth in texture.
With the rapid development of science and technology in recent years, more and more industries have found the characteristics of polyvinyl butyral (PVB): high strength, high toughness, fatigue resistance, corrosion resistance and so on. Compared with traditional materials, polyvinyl butyral (PVB) is more and more widely used because of its larger development space and wider application fields!
Application field of polyvinyl butyral -- safety glass
The membrane made of polyvinyl butyral (PVB) is a special product used to manufacture safety glass and bulletproof glass. Safety glass is a special glass made of a layer of PVB diaphragm sandwiched between two layers of ordinary glass. It has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, ultraviolet insulation and other properties. When subjected to strong external impact, PVB diaphragm can absorb impact energy, so that the glass will not break or prevent debris from hurting people. Moreover, the safety glass added with PVB diaphragm has the characteristics of high transparency, water resistance and aging resistance, and can be used in the environment of - 60 ℃. In addition, it can also be used as transparent material to replace plexiglass.
Application field of polyvinyl butyral -- ceramic film flower paper
.