Lithopone B301, Lithopone B311 powder, brilliant white pigment used in paints, inks, leather, paper, linoleum, and face powder. It was developed in the 1870s as a substitute or supplement for lead carbonate (white lead), to overcome its drawbacks of toxicity, poor weathering, and darkening in atmospheres that contain sulfur compounds. Lithopone B301, Lithopone B311 powder is an insoluble mixture of barium sulfate and zinc sulfide that precipitates upon mixing solutions of barium sulfide and zinc sulfate. The precipitate is recovered by filtration, then calcined (roasted) at temperatures above 600° C (1,112° F). Although Lithopone B301, Lithopone B311 powder has been replaced in many applications by titanium dioxide, it is still widely used in a number of products, such as water paints.
Additionally, the committee noted that the available data did not provide convincing evidence of genotoxicity for titanium dioxide as a food additive, but recognized the limitations in current methodologies with respect to the testing of poorly soluble particulate materials. Although there were uncertainties in the genotoxicity data, the experts took into account the fact that the additive was not carcinogenic in adequately conducted two-year studies in mice and rats at doses of up to 7,500 mg/kg BW per day for mice, and 2,500 mg/kg BW per day for rats, the highest doses tested. There was also no evidence of reproductive or developmental toxicity in studies in rats at doses up to 1,000 mg/kg BW per day, the highest doses tested.
The raw material used in this method is FeSO4. In order to maintain the Fe3 + concentration in the reaction medium in a specific range, reducing agent iron sheet is added in the reaction process. Iron yellow crystal seed was added and air was introduced to synthesize iron yellow under certain pH conditions. The method mainly includes two steps: (1) firstly, FeSO4 · 7H2O is used as raw material, NaOH or NH3 · H2O is used as precipitant or pH regulator, and air is used as oxidant to prepare crystal seed; (2) Iron yellow is produced by two-step oxidation with crystal seed, FeSO4, iron sheet and air.
At present, Lide powder is mainly produced in China. Most of the domestic Lide powder production is still using traditional methods. The main raw materials are zinc oxide, sulfuric acid and barium sulfide (barite and coal are produced by high temperature reduction). Zinc 45% ~ 70%. The traditional method for producing the Liede powder process is to use zinc bakelite containing more than 45% zinc as a raw material to be leached with sulfuric acid to obtain a crude zinc sulfate solution, and then to remove iron by potassium permanganate, and then replace the heavy metal with zinc powder and filter to obtain zinc sulfate. The refined liquid is further subjected to metathesis reaction, pressure filtration, calcination, rinsing, drying, and pulverization with strontium sulfide to obtain a series of different types of lindose powder containing zinc sulfide of 30% or more. The whole process is carried out in an acidic (ra<7) environment, which consumes a large amount of sulfuric acid. The sulfuric acid has strong corrosiveness and requires high production equipment. The final discharged slag is acidic slag, which brings new pollution to the environment. High requirements, high production costs, and poor quality of the products obtained.