Now it is more used in the binding of the construction industry. Compared with ordinary iron wire, it is softer and has better luster. Use in daily life does not need to carry out maintenance and maintenance, save a lot of time, but also save the cost of maintenance and maintenance. Annealed wire has good stability, good corrosion resistance, greatly prolonging the service life. More kinds, can be selected according to different uses, making annealing wire device is simple, improve the utilization rate of the device. The material properties of annealed wire can meet different processing requirements.
The top of the wall is installed with ordinary galvanized barbed rope for protection. Although the effect is better, the style is not beautiful. In recent years, it has been gradually replaced by blade barbed rope. First of all, the protection ability itself does not have any point of emphasis, can not use its own climbing at the same time, due to the relatively large volume of the intention to turn over the personnel caused no small difficulty, the whole body has a spike is very easy to be scratched or hook clothes, so in this aspect of the protection ability is better. Moreover, the style of spiral cross is more beautiful than the original single style, which is more suitable for some high-grade apartments and other external walls of the fence, at the same time, it will not cause the feeling of imprisonment in the interior. 2, PVC coated barbed rope has strong corrosion and turbidity resistance3. The structure of the dog cage should be reasonable
1. The diameter of raw materials and the thickness of the diameter have a direct impact;
The difference between them can be so divided, the amount of zinc on the surface of the high zinc thorn rope is about 5 times that of the general zinc thorn rope, which greatly extends the time of rust prevention ability. In the appearance of the two products are silver and white at the same time the metal texture is better, for the difference between the two products if it is not good to distinguish, but for long-term work experts can be able to distinguish the two at a glance.
(1) The application method of packaging and binding galvanized shaft wire ordering: ① the pulling position on the goods should be reasonably selected. When used to avoid horizontal movement of goods, the pulling position should be as low as possible; When used to avoid overturning the goods, the pulling position can be appropriately high. ② The use of galvanized iron wire [1] pull reinforcement methods mainly include: figure eight, inverted figure eight, cross, zigzag or reverse zigzag and so on. Various pull methods can be used alone, but also two or more than two kinds of use. The pull should be as symmetrical as possible. (3) When pulling reinforcement, the single or double strands of galvanized iron wire will reciprocate around the goods and vehicles between the two tying nodes, and should be pulled tight galvanized iron wire so that the tightness of each strand is as common as possible, and some of the remaining cross around its own rope rod, and the rest of the tail toward the car.
2.0*2.0mm indicates that the two strands are 2.0mm silk, and the barbed wire wrapped around the strands is also 2.0mm silk.Hexagonal net structure can be used for slope support, excavation, rock face net mine support form, slope vegetation (green color), railway road isolation block, it can be made into a cage, cushion, used for rivers, flood dam and seawall erosion protection and storage reservoir, river closed cage. Driving and guiding rivers, river flood disaster is a major water and river erosion of destruction, resulting in flooding, resulting in a great deal of loss of property by the amount of soil and water dissipation. Because of this, in dealing with these problems, the application of the habitat grid structure becomes a solution plan, which has the potential to protect the bank forever.
Plastic spraying is also we often talk about electrostatic powder spraying, it is the use of electrostatic generator to make plastic powder charged, adsorption on the surface of the iron plate, and then through 180~220 DEG C baking, so that the powder melting adhesion on the metal surface, plastic spraying products are used for indoor use of the box, paint film flat or matte effect. Spray powder mainly acrylic powder, polyester powder, etc.
After proper heat treatment or cold drawing hardening, high carbon steel wire has high strength and hardness, high elastic limit and fatigue limit (especially notched fatigue limit), cutting function is acceptable, but welding function and cold plastic deformation ability is poor.
First, cold galvanized wire production process before treatment. Before galvanizing, a series of pre-treatment work on the steel wire is required, mainly including pickling, dissolution and brine or alkali washing.Like highway guardrail, silk screen can be used, in production can also be according to the needs of customers, such as the need for different diameters of galvanized wire products, in the material selection and coating to carry out reasonable control. Our industry is a low carbon steel with good quality as raw material, and then through the pulling out, galvanized process, thus producing good galvanized iron wire.
Stainless steel blade barbed wire production process is similar to galvanized blade barbed wire production process, usually according to the mold to determine the size of the blade.
Hot dip galvanized wire: This product uses excellent carbon structural steel, through drawing, hot dip galvanized processing. Widely used in the manufacture of wire mesh, highway barrier and construction projects. With thick coating, corrosion resistance construction binding with iron wire is 22# (0.71mm), low price, its characteristics of good flexibility, not easy to break, is one of the most ideal binding wire construction industry, the first choice of low zinc cold plating treatment of iron wire. The primary choice of low zinc cold plating treatment of wire.Poor pretreatment before electroplating; Bath temperature is too low; Poor quality additives or excessive additives and organic impurities can cause poor bonding. The quality of the additive also has an effect on coating foaming. Some additives react incompletely during synthesis and continue to polymerize during long-term storage or use. The additive tends to distort the lattice and create stress, causing the coating to blister.
The purpose of checking on time is to find problems in time. Users should go to the inspection on time if they can not install the blade barbed rope and ignore it. Local rust should be removed in time and local deformation should be corrected in time, and the service life of the blade barbed rope should be extended.