Lip seals are passive mechanical devices used to close the shaft exit points on electric motors and other rotating machinery. The seals are made to keep moisture and dust out of the machinery’s inner constructions while having little to no impact on how well they work.
The inclusion of 7% steel, often in the form of a metallic insert or spring, further fortifies the oil seal's performanceThere are several types of spark plugs available in the market, including conventional, platinum, iridium, and double platinum. Each type has its advantages and lifespan. Conventional spark plugs are the most affordable but have the shortest lifespan Conventional spark plugs are the most affordable but have the shortest lifespan
Obtaining adequate adhesion of fluoroelastomer compounds to metal inserts is a major consideration in fabrication of shaft seals. Adhesive systems worked out for bisphenol-cured VDF/HFP/TFE elastomers often do not perform adequately for peroxide-curable fluoroelastomers and more base-resistant polymers that contain little or no VDF. The trend toward use of more resistant fluoroelastomers in shaft seals has necessitated considerable effort on compounding and adhesive system development to get adequate bonding of the new materials. Silane-type primers are often used to coat metal inserts; these contain residual active groups such as amine functions that interact with the fluoroelastomer compound to attain good adhesion, especially for VDF/HFP/TFE elastomers. Other adhesive systems, using epoxy compounds or tie-coats, may be necessary for difficult bonding situations.3