The rear shock absorber oil seal is responsible for keeping the oil inside the shock absorber and preventing it from leaking out. Without this seal, the oil would escape, leading to a loss of damping ability and increased wear and tear on the shock absorber. This could result in a bumpy and uncomfortable ride, as well as potentially dangerous handling characteristics.
Special exceptions still apply within the Volkswagen group. With PTFE oil seals, an aluminium or plastic housing is used in many different engine series. The Top Dead Centre (TDC) signal is no longer measured at the flywheel, but directly using a sensor on the rear crankshaft flange and integrated sensor in the oil seal. Special procedures and tools must be used for the disassembly and assembly of these parts.
An oil seal, also known as crankshaft retainer, is a small device, but essential to ensure the proper engine operation. It plays a key role in all moving parts of an engine, acting as a physical barrier. This mechanical seal fulfils the dual purpose of sealing a rotary shaft to maintain the necessary lubrication (avoiding leaks) and preventing other foreign matter from contaminating shafts and bearings in the rotary shaft equipment.
Acrylate-natural rubber is its excellent heat and hot oil resistance. ACM is resistant to motor oils with modern additives, gearbox oil, lubricants etc. In addition there is the high oxidation and ozone resistance of a saturated polymer chain. Temperature range from -20 °C to +175°C.
SHOP FOR OIL SEALSMaterial Code ISO 1629
Common Types of Oil Seal Dimensions