Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A>1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”
Yuqorī bosim svalka uskunalarida, xususan, sport avtomobillarida keng tarqalgan. Sport avtomobillari yuqori ish faoliyatiga ega bo'lganligi sababli, yoqilg‘ining tez va samarali etkazilishi muhimdir. Yuqorī bosim yoqilg‘i shlanglari bunday tizimlarda ishlatilib, eng yuqori ish faoliyatini ta'minlaydi. Shuningdek, bu shlanglar har qanday sharoitda va turli haroratlarda ishlay oladi, bu esa ularga ishonchli qiyinchiliklarda qo‘llanilishini ta'minlaydi.
Given their critical function, it is imperative that these hoses are durable, reliable, and capable of withstanding high pressures. Any failure in a hydraulic hose can lead to brake failure, posing a significant safety hazard. Therefore, understanding the quality and specifications of these components is essential for vehicle owners and mechanics alike.
Auto fuel hoses are designed to withstand the harsh conditions that come with transporting gasoline, diesel, or alternative fuels. Constructed from durable materials like rubber, reinforced with steel or fabric, these hoses are engineered to resist high temperatures, pressure, and various chemicals found in fuels. Additionally, they are designed to be flexible, which is essential for navigating the tight spaces within an automotive system.
A hydraulic oil hose is a flexible tube that conveys hydraulic fluid in a hydraulic system. These hoses are specifically engineered to withstand high pressure and extreme temperatures. They typically consist of three main components the inner tube, the reinforcement layer, and the outer cover. The inner tube is made from materials that resist high temperatures and the corrosive nature of hydraulic fluids. The reinforcement layer, often made from steel wire, provides strength and durability, while the outer cover protects against abrasion and environmental factors.
In the world of pneumatic systems and air compressors, the choice of hoses can significantly impact efficiency, performance, and safety. One particular type of hose that has gained attention is the 1% 4% compressor hose. This article aims to explore its features, benefits, applications, and maintenance tips to help you make an informed decision regarding its use in your projects.